for Quartz Devices
In-line Type Ion Beam Frequency Adjustment Equipment
SFE-X2012
Achieving the world's highest level of tact time
This equipment is intended to adjust the frequency of the crystal device. Adoption of the In-line type of three chambers achieves the world's highest level of tact time.
Features
-
- Employing In-line type of three chambers
- By separating the processing chamber and the take-out chamber and equipping with an ion source for both H and L, efficient operation with less idle time has become possible.
-
- Multi-source simultaneous processing
- SFE‐X2012 is equipped with two IGF-201 ion sources of 100mm ion beam (same as the ion source installed on SFE-B03). Each unit can process a maximum of 24 workpieces, and a total of 48 workpieces can be processed at the same time.
-
- High-precision mechanism for small workpieces
- This device also uses the highly accurate, highly stable, and highly reproducible transport mechanism that has been proven in SFE-B03. Frequency adjustment of small workpieces (1.2×1.0 or less), which was difficult with in-line device until now, can be stably mass-produced.
Performances
- Tact time
- 0.3sec/pc or less ※ for the work of 18 MHz or more, 24pcs or more/column
- Adjustment accuracy
- ±1.5 ppm or less
- Processing number
- Up to 24 columns(p4.0)×32 columns
- Production Volume
- 12,000pcs or more/hour
Options
- LD/ULD with magazine transfer and overdrive function
(manufactured by SANSEI DENSHI CO., LTD.)
- Can be connected to in-line system of SANSEI DENSHI CO., LTD.
- Small work contact adjustment system:“SEARCHROID”
Applications
- Products
- XTAL/OSC (3225,2520,2016,1612,1210,1008),
Tuning fork oscillator (3215,2012,1610,1210)
Outline
Exhaust Pump | RP+MBP+TMP |
Installation Dimensions | W3,000mm×D2,100mm×H2,000mm |
Equipment Weight | 2,150kg |
Power Supply Capacity | AC200V(3φ)/ 18kVA(54A) |
*For the improvement of product, please understand that the specifications are subject to change without prior notice.
**This product may be applicable to export control products such as strategic raw materials which are regulated by the Foreign Exchange and Foreign Trade Control Law.
Accordingly when you bring out the applicable products outside Japan. You should take a necessary action such as application of an export permit to the Government of Japan.